Electro-Optics Interface Module
Options Available:
Specialized Signal Processing
MultipleLight Source Selection
Analog or Digital Outputs
Web Based Configuration
MODBUS Control
Multiple Units in a Rack Enclosure
Key Benefits of the Electro-Optic Module Include:
Flexible Signal Processing
Single or Multi-Channel Configuration
Reduced EMI/RFI
"Internet Ready"
Multiple Output Options
Standard Eurocard 3U Form Factor
Automated Self Test
Typical Specifications Include:
Electrical Characteristics:
• Primary power input voltages
~+5VDC,
+12VDC, -12VDC
• Maximum current draw, per input voltage
~<1.5A @
+5VDC
~<400mA @
+12VDC
~<400mA @
-12VDC
• Maximum power draw:
~43W @
115VAC/60Hz
• Nominal power draw:
~12W @
115VAC/60Hz
• Warm up time for maximum accuracy:
~15 min.
• Frequency response:
~6 Hz to 5
kHz
Mechanical Characteristics:
• Dimensions W x H x D: 159 mm x 64 mm x
261 mm
• Weight: about 0.53 kg1
Ambient Characteristics:
• Operating Temperature:
~-20o C
- +80o C
• Storage Temperature:
~-40o X
- +80o C
• Humidity:
~0 to 95%
non-condensing
Optical Characteristics:
• Wavelength Range:
~1310nm or
1550nm (other wavelengths available)
• Output Power:
~up to 10 mW
• Optical connectors:
~FC/APC
~SC/APC
(other optionally available)
Controls & Indicators:
• LEDs:
~PWR, S1, S2,
ERR
• Pushbuttons:
~RST, LOAD
• Connectors (Single Channel Configuration):
~F1, F2, ENET,
OUTPUT
• Connectors (Three-Channel Configuration):
~F1- F6, ENET,
OUT1- OUT3
Software Interfaces:
• Ethernet:
~Standard
HTTP Browsers (e.g. Internet Explorer, Mozilla Compatible, Firefox, Netscape)
• MODBUS TCP/IP:
~Lab View VI,
Custom Programming
Output Options:
Analog:
4-20 mA, +/- 5V, +/- 10V
Digital:
RS-232, RS-485, Ethernet
1 Depending
upon configuration
Ask Questions: type your question below, leave your name, phone
number, and email address in the area below, and press "Submit Question"